Command Line Processing; Table 4-3 Keystroke Commands - SMC Networks TigerSwitch SMC8612T2 Management Manual

Mode
VLAN
MSTP
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode.
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#

Command Line Processing

Commands are not case sensitive. You can abbreviate commands and
parameters as long as they contain enough letters to differentiate them
from any other currently available commands or parameters. You can use
the Tab key to complete partial commands, or enter a partial command
followed by the "?" character to display a list of possible matches. You can
also use the following editing keystrokes for command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-P
Table 4-2 Configuration Commands (Continued)
Command
vlan database
spanning-tree
mst-configuration

Table 4-3 Keystroke Commands

Prompt
Console(config-vlan)
Console(config-mstp)#
Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates the current task and displays the
command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes all characters from the cursor to the end of
the line.
Repeats current command line on a new line.
Enters the last command.
E C
NTERING OMMANDS
Page
4-231
4-214
4-11