Creating Trunk Groups; Figure 3-37 Port - Port Configuration - SMC Networks TigerSwitch SMC8612T2 Management Manual

Web – Click Port, Port Configuration or Trunk Configuration. Modify the
required interface settings, and click Apply.
CLI – Select the interface, and then enter the required settings.
Console(config)#interface ethernet 1/8
Console(config-if)#description RD SW#13
Console(config-if)#shutdown
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
Console(config-if)#speed-duplex 100half
Console(config-if)#flowcontrol
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#exit
Console(config)#interface ethernet 1/12
Console(config-if)#combo-forced-mode copper-forced
Console(config-if)#

Creating Trunk Groups

You can create multiple links between devices that work as one virtual,
aggregate link. A port trunk offers a dramatic increase in bandwidth for
network segments where bottlenecks exist, as well as providing a
fault-tolerant link between two devices. You can create up to six trunks at a
time.

Figure 3-37 Port - Port Configuration

P C
ORT ONFIGURATION
4-168
4-168
4-174
4-170
4-169
4-172
4-171
4-174
3-85