Figure 3-32 Acl Mask Configuration - Ip - SMC Networks TigerSwitch SMC8612T2 Management Manual

C
ONFIGURING THE
Web – Configure the mask to match the required rules in the IP ingress or
egress ACLs. Set the mask to check for any source or destination address, a
specific host address, or an address range. Include other criteria to search
for in the rules, such as a protocol type or one of the service types. Or use
a bitmask to search for specific protocol port(s) or TCP control code(s).
Then click Add.
3-72
S
WITCH

Figure 3-32 ACL Mask Configuration - IP