Mac-Address-Table Static; Table - SMC Networks TigerSwitch SMC8612T2 Management Manual

Command
show mac-address-table
mac-address-table aging-time Sets the aging time of the address
show mac-address-table
aging-time

mac-address-table static

This command maps a static address to a destination port in a VLAN. Use
the no form to remove an address.
Syntax
mac-address-table static mac-address interface interface
vlan vlan-id [action]
no mac-address-table static mac-address vlan vlan-id
• mac-address - MAC address.
• interface
- ethernet unit/port
- port-channel channel-id (Range: 1-6)
• vlan-id - VLAN ID (Range: 1-4094)
• action
- delete-on-reset - Assignment lasts until the switch is reset.
- permanent - Assignment is permanent.
Default Setting
No static addresses are defined. The default mode is permanent.
Command Mode
Global Configuration
Table 4-50 Address Table Commands (Continued)
- unit - This is device 1.
- port - Port number.
A
Function
Displays entries in the
bridge-forwarding database

table

Shows the aging time for the
address table
T
DDRESS ABLE
Mode Page
PE
GC
PE
C
OMMANDS
4-203
4-204
4-204
4-201