Configuring Client Pc; Tcp/Ip Configuration; Windows 98/Me - SMC Networks 7904WBRB2 - annexe 1 Manual

C C
ONFIGURING

TCP/IP Configuration

To access the Internet through the Barricade, you must configure the
network settings of the computers on your LAN to use the same IP subnet
as the Barricade. The default IP settings for the Barricade are:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Note: These settings can be changed to fit your network requirements,
but you must first configure at least one computer to access the
Barricade's web configuration interface in order to make the
required changes. (See "Configuring the ADSL Router" on page
4-1 for instruction on configuring the Barricade.)

Windows 98/Me

You may find that the instructions in this section do not exactly match
your version of Windows. This is because these steps and screen shots
were created from Windows 98. Windows Millennium Edition is similar,
but not identical, to Windows 98.
1. On the Windows desktop,
click Start/Settings/Control
Panel.
3-2
PC
LIENT