Commissioning; Operation - Daikin EPRA18DAV3 Installer's Reference Manual

9 | Configuration
Export MMI settings

9.5.10 Commissioning

9.5.11 Operation

Installer reference guide
194
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
# Code
[9.N] N/A
To export MMI settings
1 Open the user interface panel and insert a USB memory stick.
2 On the user interface, go to [9.N] Export MMI settings.
3 Select OK.
4 Remove the USB memory stick and close the user interface
panel.
Overview
The following items are listed in the submenu:
A
Information
Installer settings

Commissioning

User profile

Operation

About commissioning
See: "10 Commissioning" [
Overview
The following items are listed in the submenu:
Your MMI settings will be exported
to the connected storage device:
▪ Back
▪ OK
[A] Commissioning
[A.1] Operation test run
[A.2] Actuator test run
[A.3] Air purge
[A.4] UFH screed dryout
4
199]
EPRA14~18DAV3+W1 + ETVH/X16S18+23DA6V+9W(G)
Description
Daikin Altherma 3 H HT F
4P587502-1B – 2020.12
—
—