Daikin EPRA18DAV3 Installer's Reference Manual page 196

9 | Configuration
Installer reference guide
196
a WLAN adapter
b Router
c Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface of the indoor unit:
Mode: Turn AP mode ON (= WLAN adapter active as access point) or OFF.
# Code
[D.1] N/A
WPS: Connect the WLAN adapter to the router.
# Code
[D.2] N/A
Reboot: Reset the WLAN adapter.
# Code
[D.3] N/A
Device info: Consult information about the WLAN adapter.
# Code
[D.4] N/A
The WLAN adapter needs to be installed by the
installer on the indoor unit (on the inside of the
front panel). See:
▪ Installation manual of the WLAN adapter
▪ Addendum book for optional equipment
Field supply.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Description
Enable AP mode:
▪ No
▪
Yes
Description
Connect to home network:
▪ Back
▪ OK
Description
Reboot the gateway:
▪ Back
▪ OK
Description
Device info:
▪ SSID
▪ MAC address
▪ Serial number
EPRA14~18DAV3+W1 + ETVH/X16S18+23DA6V+9W(G)
Daikin Altherma 3 H HT F
4P587502-1B – 2020.12