Table of Contents
Advertisement
Table 4-2 shows how signals are routed to the NI-PGIA.
AI
Ground-Reference
Settings
RSE
NRSE
DIFF
*
On NI 6225 devices, the reference for each AI <16..63> signal is AI SENSE 2, and each AI <64..79>
signal is AI SENSE in NRSE mode.
For differential measurements, AI 0 and AI 8 are the positive and negative inputs of differential
analog input channel 0. For a complete list of signal pairs that form differential input channels,
refer to the pinout diagram for your device in Appendix A,
Caution
(and for signal pairs in differential mode with respect to each other) are listed in the
specifications document for your device. Exceeding the maximum input voltage of
AI signals distorts the measurement results. Exceeding the maximum input voltage
rating also can damage the device and the computer. NI is not liable for any damage
resulting from such signal connections.
Figure 4-2. NI-PGIA
V
in+
V
in–
Table 4-2. Signals Routed to the NI-PGIA
Signals Routed to the
Positive Input of the
NI-PGIA (V
AI <0..79>
AI <0..15>
AI <16..79>
AI <0..7>
AI <16..23>
AI <32..39>
AI <48..55>
AI <64..71>
The maximum input voltages rating of AI signals with respect to ground
Instrumentation
Amplifier
PGIA
V
V
= [V
– V
] × Gain
m
in+
in–
)
in+
Module/Device-Specific
M Series User Manual
+
Measured
m
Voltage
–
Signals Routed to the
Negative Input of the
NI-PGIA (V
AI GND
AI SENSE
AI SENSE 2
AI <8..15>
AI <24..31>
AI <40..47>
AI <56..63>
AI <72..79>
© National Instruments | 4-5
)
in-
*
Information.
Advertisement
Table of Contents
