CX200 Programming Guide
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO CX200 Printers
Print Test Label
<ESC>CT
Example:
<ESC>CT
Placement:
This command should be sent in a separate data stream
Default:
There is no default for this command.
To print a test label
<ESC>A
<ESC>CT
<ESC>Z
1. When the printer finishes printing the Test Label, it is in the
hexadecimal print mode. This mode is used for diagnostic
troubleshooting and lists the current status of the printer
configuration,
PN 9001055 Rev. E
Page 91