Journal Print - SATO CX200 Programming Manual

CX200 Programming Guide
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 44

Journal Print

<ESC>J
Example: See above
Placement: Immediately following <ESC>A
Default: None
To print text in a line by line format on a label. By specifying this
command, you automatically select Font S with a Character
Expansion of 2x2. You also establish a base reference point of
H2,V2. The character pitch is 2 dots and the line gap is 16 dots.
Simply issue an ASCII <CR> at the end of each text line.
<ESC>A
<ESC>J WITH THE JOURNAL FEATURE
YOU CAN PRINT TEXT WITHOUT
USING ANY FONT COMMANDS
OR POSITION COMMANDS
<ESC>Q1<ESC>Z
1. Journal mode assumes a maximum label width. Otherwise, you
may print where there is no label and damage your print head.
2. It is effective only for the current print job.
PN 9001055 Rev. E
SATO CX200 Printers