SATO CX200 Programming Manual page 71

Printer Output
Special Notes
SATO CX200 Printers
1. The value specified for Print Quantity (see Page 55) should be
equal to the number of different sequential values desired
multiplied by the number of repeats specified.
Example:
To print 2 sets each of the numbers 1001-1025 on separate
labels, we need 50 total labels. The commands would be as
follows:
<ESC>A
<ESC>H0100<ESC>V0100<ESC>F002+001<ESC>XM1001
<ESC>Q50
<ESC>Z
2. It is necessary to specify the print position for each sequential field
on a label.
3. Up to eight different sequential fields can be specified per label.
4. This command ignores alpha characters in the sequential number
field.
5. This command can not be used with the following commands:
Copy Image, Page 31
Reverse Image, Page 60
Line Feed, Page 47
PN 9001055 Rev. E
CX200 Programming Guide
Page 67