SATO CX200 Programming Manual page 28

CX200 Programming Guide
Special Notes
Page 24
This command will expand the following fonts:
1. Fonts U, S, M, XU, XS, XM, OA & OB (see Page 34) and fonts WB,
WL, XB and XL (see Page 36).
2. This command will also affect the following commands:
Character Pitch (see Page 26)
Characters, Custom-Designed (see Page 21)
3. The Character Expansion value is in effect for the current print job
until a new expansion command is specified.
4. The Line and Box command, if used within the data stream, may
return all subsequent text to the default expansion of 1 x 1.
Therefore, either send the Character Expansion command before
all printed data, or send Line and Box commands last, preceding
the <ESC>Q Quantity command.
PN 9001055 Rev. E
SATO CX200 Printers