SATO CX200 Programming Manual page 69

Special Notes
SATO CX200 Printers
1. This command is provided for compatibility with other SATO
printers. It is not recommended for new label designs and the
<ESC>% rotate command should be used.
2. Do not combine this command and the <ESC>% rotate command
(see Page 62) in the same data stream.
3. A custom graphic is not affected by this command. Therefore,
always design and locate your graphic image to print in the
appropriate orientation.
4. See Rotated Fields, Page 7, for more information.
5. The specified values are valid until another Rotate (<ESC>R)
command is received.
6. Receipt of a Stop Print (<ESC>Z) command will reset the setting to
the default value.
PN 9001055 Rev. E
CX200 Programming Guide
Page 65