Journal Print - SATO M-5900RV Operator And Technical Reference Manual

Command Structure
Command Function
Printer Input
Printer Output
Special Notes
PN 9001081
Rev. C
<ESC>J
Example: See above
Placement: Immediately following the <ESC>A
Default: None
To print text in a line by line format on a label. Bys specifying this command, you
automatically select Font S with a Character Expansion of 2 x 2. You also
establish a base reference point of H2, V2. The character pitch is 2 dots and the
line gap is 16 dots. Simply issue an ASCII<CR> at the end of each text line.
<ESC>A
<ESC>J WITH THE JOURNAL FEATURE
YOU CAN PRINT TEXT WITHOUT
USING ANY FONT COMMANDS
OR POSTION COMMANDS
<ESC>Q1<ESC>Z
1. Journal mode assumes a maximum label width. Otherwise, you may print
where there is no label and damage your print head.
2. It is effective only for the current print job.
SATO M-5900RV Operator and Technical Reference Manual

Journal Print

Section 4. Programming Reference
Page 4-49