Table of Contents
Advertisement
H2 NIR Upgrade Installation Guide
Install NIR Upgrade for Single, Twin, and Triple
5. Reapply the zip ties to secure the load B cable. Trim
the zip tie tails.
6. Carefully remove the two button head cap screws,
holding the chamber to the load cell.
CAUTION: Avoid stripping the screws, which have
Loctite on them, by using a good Allen wrench
and cleaning out the hex-head hole with a pick.
Button head
cap screws
7. Remove the test chamber assembly from the
GrainGage.
7
Advertisement
Table of Contents
