Table of Contents
Advertisement
H2 NIR Upgrade Installation Guide
Install NIR Upgrade for Classic
8. Use three zip ties to secure the cables to the chassis as
shown.
9. Secure the moisture cable to the crossbar with two zip
ties as shown.
10. Attach the moisture cable to the DSP moisture port.
11. Connect the SCiO Sensor cable end to the SCiO
Sensor.
12. Loop and secure the extra length of SCiO cable to the
chassis crossbar.
Note: Leave enough slack in the cable that it will not
touch the side of the chassis as the chamber moves.
The looped cable can be secured under the crossbar
(as shown) or tucked inside the crossbar.
29
Advertisement
Table of Contents
