H2 NIR Upgrade Installation Guide
2.2 Install the New Chamber
Install NIR Upgrade for Classic
7. Carefully remove the two button head cap screws
!
8. Remove the test chamber assembly from the
1. From the new chamber remove the air T from the
Socket-head
cap screws
holding the chamber to the load cell.
CAUTION: Avoid stripping the screws, which have
Loctite on them, by using a good Allen wrench
and cleaning out the hex-head hole with a pick.
Button head
cap screws
GrainGage.
spacer.
a. Remove the two socket head cap screws. Keep
track of the screws.
21