Install The New Chamber - Juniper HarvestMaster GrainGage H2 NIR Upgrade Installation Manual

H2 NIR Upgrade Installation Guide

1.2 Install the New Chamber

Install NIR Upgrade for Single, Twin, and Triple
1. Place the new chamber in the GrainGage. Fit the
chamber lip over the fill guide.
Note: If necessary, screw in the load cell overload
protection screw four or five turns to allow the new
chamber to fit into place.
2. Apply Loctite 243 to the threads of the two button
head screws. Hand tighten the screws.
Button head
cap screws
Load cell
overload
protection
screw
8