Table of Contents
Advertisement
H2 NIR Upgrade Installation Guide
Install NIR Upgrade for Classic
Air T spacer
Phillips head
screws
Socket
head
screws
2. Remove the air lines from the new chamber.
3. Cut the removed air lines to the following lengths.
b. Remove the two Phillips head screws, and throw
them away.
c. Remove the air T spacer, and throw it away.
d. Secure the T fittings to the chamber, using the two
socket head cap screws.
■ Short orange line: 4.5 in.
■ Short yellow air line: 8.5 in.
Discard the trimmed off pieces.
Note: You will use the long yellow and orange lines at
their original length.
22
Advertisement
Table of Contents
