Adjusting The Basic Position Of The Shift Lever - KTM 500 EXC-F 2018 Owner's Manual

17 TUNING THE ENGINE
17.8
134

Adjusting the basic position of the shift lever

401950-12
401951-10
–
Remove screw 1 with the washers and take off shift
lever 2 .
–
Clean gear teeth A of the shift lever and shift shaft.
–
Mount the shift lever on the shift shaft in the required position
and engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
Mount and tighten screw with the washers.
Guideline
Screw, shift M6
lever
14 Nm (10.3 lbf ft)
Loctite ® 243™