Changing The Main Fuse - KTM 500 EXC-F 2018 Owner's Manual

15.4

Changing the main fuse

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle.
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the seat. (
Main work
–
Pull starter relay
E00361-10
–
Take off protection caps
–
Remove faulty main fuse
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire
A spare fuse
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical equipment is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the starter relay onto the holder and route the cable.
–
Mount the protection caps.
E00362-10
Finishing work
–
Mount the seat. (
15 ELECTRICAL SYSTEM
while the engine is idling until
p. 77)
1
from the holder.
2 .
3
.
.
4
is located in the starter relay.
p. 153)
p. 77)
117