12 SERVICE WORK ON THE CHASSIS
12.6
12.7
64
Installing the fork protector
V00332-11
Removing the fork legs
K00545-10
V00452-10
V00453-10
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
2
tighten screws
.
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws
and take off the clamp.
–
Remove the cable tie(s).
–
2
Remove screws
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
(EXC‑F EU/AU)
–
3
Loosen screws
. Take out the left fork leg.
–
4
Loosen screws
. Take out the right fork leg.
(EXC‑F Six Days)
–
Loosen screws
3
. Take out the left fork leg.
–
4
Loosen screws
. Take out the right fork leg.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 119)
p. 62)
(
p. 108)