Changing The Fuses Of Individual Power Consumers - KTM 500 EXC-F 2018 Owner's Manual

15 ELECTRICAL SYSTEM
15.5
118

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
E00394-10
E00395-10
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the seat. ( p. 77)
Main work
–
Pull engine electronics control unit
hang it to the side.
–
Open fuse box cover 2 .
–
Remove the defective fuse.
Guideline
(EXC‑F EU, EXC‑F Six Days EU)
Fuse 1 ‑ 10 A - engine electronics control unit, lambda
sensor, combination instrument, combination switch
(optional), fuel injection, diagnostics connector, fuse 4
(EXC‑F AU)
Fuse 1 ‑ 10 A - engine electronics control unit, combi-
nation instrument, combination switch (optional), fuel
injection, diagnostics connector, fuse 4
Fuse 2 – 10 A – high beam, low beam, parking light, tail
light, license plate lamp
Fuse 3 - 10 A - radiator fan, horn, brake light, turn signal
Fuse 4 – 5 A – fuel pump
Fuses res - 10 A - spare fuse
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire .
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Use spare fuses with the correct rating only.
Fuse (75011088010) (
while the engine is idling until
1
from the holder and
p. 153)