Handlebar Position; Adjusting The Handlebar Position - KTM 500 EXC-F 2018 Owner's Manual

11.15

Handlebar position

11.16

Adjusting the handlebar position

Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
(EXC‑F EU/AU)
On the upper triple clamp, there are 2 holes at a distance
A
of to each other.
Hole distance
The holes on the handlebar supports are placed at a distance
B
of from the center.
Hole distance
The handlebar holders can be mounted in four different posi-
tions.
M00993-10
(EXC‑F Six Days)
On the upper triple clamp, there are 2 holes at a distance
of A to each other.
Hole distance
The holes on the handlebar supports are placed at a distance
B
of from the center.
Hole distance
The handlebar holders can be mounted in four different posi-
tions.
M00987-10
11 TUNING THE CHASSIS
15 mm (0.59 in)
A
3.5 mm (0.138 in)
B
15 mm (0.59 in)
A
3.5 mm (0.138 in)
B
59