15 ELECTRICAL SYSTEM
15.1
15.2
114
Removing the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of batteries with less than the minimum voltage correctly.
F00138-10
Installing the battery
H00386-10
1 m (3 ft)
9 V
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the seat. (
p. 77)
Main work
–
Disconnect negative cable
–
Pull back positive terminal cover
tive cable from the battery.
–
Remove screw
3
.
–
4
Pull holding bracket
forward and remove battery toward
the top.
Main work
–
Insert the battery into the battery compartment with the termi-
nals facing forward and secure with holding bracket
Battery (HJTZ5S-FP) (
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
3
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Slide positive terminal cover
–
4
Connect negative cable
Guideline
Screw, battery termi-
nal
while the engine is idling until
1
from the battery.
2
and disconnect the posi-
1
p. 153)
2
.
M6
10 Nm (7.4 lbf ft)
to the battery.
M5
2.5 Nm
(1.84 lbf ft)
7
over the positive terminal.
to the battery.
M5
2.5 Nm
(1.84 lbf ft)
.