Changing The Combination Instrument - KTM 500 EXC-F 2018 Owner's Manual

15.12

Changing the combination instrument

Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Pull the combination instrument upward out of the holder.
V00370-10
–
Using a coin, turn protection cap
wise and remove it.
–
Remove combination instrument
–
Insert the combination instrument with the label facing
upward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
V00371-10
–
Position protection cap
using a coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
V00372-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set kilometers or miles. (
–
Adjust the combination instrument. (
–
Set the clock. (
15 ELECTRICAL SYSTEM
1 with the washers.
2
all the way counterclock-
3
.
2
and turn all the way clockwise
p. 121)
p. 24)
p. 25)
p. 26)
p. 119)
p. 153)
p. 120)
123