Äscene Setup Screen - Roland VR-400UHD Reference Manual

4k streaming av mixer
Hide thumbs Also See for VR-400UHD:
Table of Contents

Advertisement

Scene Setup screen
Setting
Value
Background, Layer 1, 2 These are the settings for each layer.
Window
These settings are for adjusting the layer window.
-3840–+3840
Horizontal
Position
-2160–+2160
Vertical
0–1920–3840
Horizontal
Size
0–1080–2160
Vertical
Aspect
1:1, 3:2, 4:3, 16:9
View
Adjusts the layer video (the input video that's shown in the layer window).
Horizontal
-3840–0–+3840
Position
Vertical
-2160–0–+2160
Sets the reference value for enlarging/shrinking the layer video according to changes in layer window size.
Dot by Dot
Output
Reference
Size
Window Letterbox
Window Crop
Zoom (%)
1.0–100.0–1000.0
Border
These are the border-related settings for the layer window.
Disabled, Enabled
Switch
Width
0–50–3840
Color
Sets the color of the window border.
Picker
Hue (deg.)
0–359
Saturation
0–50–100
Value
0–50–100
Layer 1, 2 Key
These are the settings related to key composition for layers 1 and 2.
Key
Configures the key composition.
Switch
Disabled, Enabled
This sets the key type used for key composition.
Luminance Black
Luminance White
Type
Chroma Blue 1–3
Chroma Green 1–3
User Chroma
0–32–255
Level
0–32–255
Gain
User Chroma
Sets the desired key color. This can be set if "Type" is "User Chroma".
Center
Sets the key color.
Hue (deg.)
0–359
Saturation
0–50–100
Value
0–50–100
Range
Sets the range of colors within which to apply transparency, based on the key color.
Hue (deg.)
0–359
Saturation
0–50–100
Value
0–50–100
Chroma Picking
[HOME] button
Explanation
(bold text: default value)
Adjusts the horizontal position.
Adjusts the vertical position.
Adjusts the horizontal size.
Adjusts the vertical size.
Sets the aspect ratio (horizontal/vertical).
Adjusts the horizontal position.
Adjusts the vertical position.
Maintains the resolution of the input video. This enlarges/shrinks the input video regardless of the
window size.
Enlarges/shrinks the input video according to the output format, regardless of the window size.
Enlarges/shrinks the input video, so that the whole input video is shown within the area of the
window.
A letterbox (a black strip above/below or to the left/right of the video content) is added to the input
video if the aspect ratios of the window and input video don't match.
The input video is enlarged/shrunk so that no margins are visible within the window.
If the aspect ratios of the window and input video don't match and the video extends past the
window size, the video content is cropped (trimmed off ).
Sets the zoom ratio for the layer video.
Sets whether to show or hide the window border.
Adjusts the width of the window border.
Shows the color picker window. You can use the color picker to select the color of the window
border. The data for the color you selected is reflected in the "Hue (deg.)", "Saturation" and "Value".
Adjusts the volume.
Adjusts the saturation.
Adjusts the sensitivity of the humanizer.
Enables/disables key-compositing.
Composite using luminance key. Makes black portions transparent according to brightness.
Composite using luminance key. Makes white portions transparent according to brightness.
Composite using chroma key. Uses a color threshold to make blue transparent.
Select a composite preset that works the best, from 1 to 3.
Composite using chroma key. Uses a color threshold to make green transparent.
Select a composite preset that works the best, from 1 to 3.
Composite using chroma key. Makes the specified key color transparent according to hue.
Adjusts the degree of extraction (transparency) for the key.
Adjusts the degree of edge blur (semi-transmissive region) for the key.
Adjusts the hue.
Adjusts the saturation.
Adjusts the color brightness or luminosity.
Adjusts the hue.
Adjusts the saturation.
Adjusts the color brightness or luminosity.
You can select a desired key color by touching the Scene Edit screen at left.
The data for the key color you selected is reflected in the Center "Hue (deg.)", "Saturation" and "Value".
Ó
Ó
<SCENE EDIT>
<SETUP>
Default settings are as follows.
Background: 0, Layer 1: 50, Layer 2: 100
Parameter list
39

Advertisement

Table of Contents
loading

Table of Contents