Äswitching Scenes In Pgm/Pst Mode - Roland VR-400UHD Reference Manual

4k streaming av mixer
Hide thumbs Also See for VR-400UHD:
Table of Contents

Advertisement

Switching scenes in PGM/PST mode
Here are the steps when "PGM/PST mode" (p. 10) is selected in the system mode settings.
1.
Press the [HOME] button.
The audio mixer screen is shown on the left
monitor, and the multi-view screen is shown
on the right monitor.
2.
Press the [MIX] or [WIPE] button to select the transition
effect.
Mix
The two videos are mixed as the transition
occurs.
Wipe
The next video moves across to replace the
original video.
3.
Use the [TIME] knob to set the video transition time
(0.0–2.0 sec).
4.
Select a preset scene (the next scene to be output).
Selecting by touch on the multi-view screen
1
Touch the preset area.
A green border appears around the preset area
preset scene in the preview area while the green border is shown.
2
In the preview area, touch the scene you want to output.
A green border is shown around the selected scene.
Green border
1
2
Preview area
Selecting with the buttons
Press the SCENE/BANK [1]–[8] buttons.
1
The selected button lights up green.
5.
Press the [AUTO] or [CUT] button.
Button
[CUT]
[AUTO]
MEMO
¹ When you touch the transition effect area on the multi-view
You can select a
.
¹
Auto-transition function
Use the auto-transition function to automate the pressing of
the [AUTO] button. The program scene switches automatically
at the timing with which you selected the preset scene in step 4.
Press the [AUTO TRANSITION] button to turn the auto-
transition function on/off.
This is set to "ON" by factory default.
¹ When you touch the program area in the multi-view screen,
a red border appears in the program area. You can touch to
select a program scene in the preview area while the red
border is shown.
Select a program scene to cut to the next scene, regardless of
the transition effect you've selected.
Explanation
The program scene switches via cut.
The program scene switches with a transition effect applied.
screen, the Transition Setup window appears, where you can
edit the transition pattern for the wipe effect and so on (p. 41).
Video operations
11

Advertisement

Table of Contents
loading

Table of Contents