Äinterlinking Audio Output To Scene Switching - Roland VR-400UHD Reference Manual

Interlinking audio output to scene
switching (audio follows video)
The Audio Follows Video function recalls the input audio volume
settings you registered beforehand when you switch between
scenes.
* Audio Follows Video can only be used
1.
Touch AFV <SETUP> on the audio mixer screen.
The Audio follows video screen appears.
2.
Touch the <Scene 1-1> through <Scene 1-8> tabs to
select the scene to set.
3.
Touch the parameters to set the volume for each input.
Setting Explanation
Sets this to "Enabled".
Switch
The volume setting is recalled when you switch to the
scene in question.
Mic 1–6
Left box
Line 1, 2
HDMI
Right box
USB
* Touch <Snapshot> when you want to apply the current volume
settings for each input
.
4.
On the audio mixer screen, touch AUDIO / VIDEO FOLLOW
<OFF> to turn AVF to the ON setting.
Touching this button toggles between "OFF", "VFA" and "AFV".
When this is set to "AFV", the Audio Follows Video function turns on.
* You can also do this by pressing the [FOLLOW] button.
on the scenes in bank
Sets the input volume.
To recall the volume settings, set this to
"Enabled".
1.
Audio operations
25