Table of Contents
Advertisement
Other functions
Restoring the factory settings
(factory reset)
Here's how you can return the settings of the VR-400UHD to their
factory-set state.
If the unit does not operate as described even though you've
followed the steps in the manual, try executing a factory reset.
NOTE
¹ When you execute a factory reset, all of the settings you
made and the still images saved in memory are lost.
¹ Do not turn off the power while the message "Processing. " is
shown.
1.
From the [SETUP] button, touch <Factory Reset> in the
<System> tab.
A confirmation message appears.
* To cancel, touch <Cancel>.
2.
Touch <Execute>.
This executes the factory reset. "Done. " is shown once the
operation is finished.
3.
Touch <OK> to close the message.
28
Advertisement
Table of Contents
