Deleting A Still Image - Roland VR-400UHD Reference Manual

Deleting a still Image

Here's how to delete the still image that's saved in the unit.
1.
From the [SETUP] button, touch <Still Image> in the
<Video> tab.
The Still Image screen appears.
2.
Touch Memory Select <Still Image 1>–<Still Image 8> to
select the still image you want to delete.
A red border is shown around the selected memory.
Loading still images from internal memory after startup
The still images saved to internal memory are loaded when you turn on this unit. A status message is shown while the still images are being
loaded, and you can touch <Cancel> to cancel the operation. If you've canceled the operation, you can load the still images later from internal
memory.
* If you've already loaded different still images after starting up this unit, the still images in internal memory are overwritten.
1.
From the [SETUP] button, touch <Still Image> in the
<Video> tab.
2.
To specify an internal memory and load the still images,
touch Memory Select <Still Image 1>–<Still Image 8>.
* You don't need to do this if you want to load all of the still
images from memory.
3.
Touch Import from <Internal>.
The Load from Internal Memory window appears.
3.
Touch <Delete>.
A confirmation message appears.
* To cancel, touch <Cancel>.
4.
Touch <Execute>.
The still image is deleted. "Done. " is shown once the operation is
finished.
5.
Touch <OK> to close the message.
(after canceling still image load during startup)
4.
Touch either <All memories> or <One memory>.
All memories
One memory
The still image is loaded into the unit. "Done. " is shown once the
operation is finished.
5.
Touch <OK> to close the message.
Load all still images saved to internal memory.
Only the still images from the internal memory
that you specified in step 2 are loaded.
Video operations
17