Setting The Click - Roland V-Drums TD-20 Owner's Manual

Chapter 6. Sequencer (Playback)

Setting the Click

1. Press [TEMPO] - [F1 (CLICK)].
The "CLICK SETTINGS" screen appears.
fig.06-Click5_70
2. Press [CURSOR] to select the parameter.
3. Use [+/-] or [VALUE] to make settings.
Parameter Value
[F1 (INST)]
Inst Refer to right col-
umn.
Pan L15–CENTER–
R15
Amb Send 0–127
Level
When "---" is displayed, this level is set to
"0" automatically to prevent the click sound
from leaking.
Output MASTER
+PHONES,
PHONES ONLY,
DIRECT 5,
DIRECT 6,
DIRECT 5+6,
DIRECT 7,
DIRECT 8,
DIRECT 7+8
[F2 (TIMESIG)]
Time Numerator: 0–13
Signature Denominator:
2, 4, 8, 16
Interval 1/2 (half note), 3/8 (dotted quarter note),
1/4 (quarter note), 1/8 (eighth note),
1/12 (eighth-note triplet), 1/16 (16th note)
[F3 (COUNT)]
Count In OFF, 1 MEAS,
Play 2 MEAS
Count In OFF, 1 MEAS,
Rec 2 MEAS
During OFF, ON
Play
During Rec OFF, ON
60
Description
Sound for the click
Stereo position of the
click
Amount of ambience
for the click
You have to turn the
ambience on (p. 40).
Output destination for
the click
You can also select
by pressing [SETUP]
- [F2 (OUTPUT)] (p.
78).
When the numerator is
set to "0," no accent is
added to the first beat.
Adds a count in before
playback.
Adds a count in before
recording.
Sets the click to play
during pattern play-
back.
Sets the click to play
during recording.
To adjust the click level, move [GROUP FADERS] -
[CLICK] (p. 24).
Click Instruments
VOICE, CLICK, BEEP, METRONOME, CLAVES,
WOOD BLOCK, STICKS, CROSS STICK, TRIANGLE,
COWBELL, CONGA, TALKING DRUM, MARACAS,
CABASA, CUICA, AGOGO, TAMBOURINE, SNAPS,
909 SNARE, 808 COWBELL