Editing A Pattern [F4 (Edit)]; Copying A Pattern [F1 (Copy)] - Roland V-Drums TD-20 Owner's Manual

Chapter 7. Sequencer (Recording/Editing)

Editing a Pattern [F4 (EDIT)]

You can edit user patterns.
PATTERN EDIT screen (Preset Pattern)
fig.07-PrstEdit_70
PATTERN EDIT screen (User Pattern)
fig.07-UserEdit_70

Copying a Pattern [F1 (COPY)]

Copy the pattern as is to the User patterns.
fig.07-Cpy1
1 2 3
Src
1 2 3
Dst
You can copy selected measures of a part or pattern. Unlike
copying an entire pattern, settings such as instrument and part
volume etc. will not be copied.
fig.07-Cpy2
1 2 3
Src
1 2 3
Dst
1. Press [PATTERN] - [F4 (EDIT)].
The "PATTERN EDIT" screen appears.
2. Press [F1 (COPY)].
The "COPY PATTERN" screen appears.
fig.07-Cpy3_70
64
4 5 6 7 8
4 5 6 7 8
4 5 6 7 8
4 5 6 7 8
3. When you want to copy selected measures or
part, press [F4 (MEASURE)].
The "COPY PATTERN MEASURE" screen appears.
fig.07-Cpy4_70
4. Press [CURSOR] to select the parameter.
5. Use [+/-] or [VALUE] to select the pattern, part,
and measures.
Pattern Part
Src Copy- Copy-
source pat- source part
tern
Dst Copy-desti- Copy-desti-
nation pat- nation part
tern
6. Press [F5 (COPY)].
The confirmation screen appears.
fig.07-Cpy5_70
7. Press [F5 (EXECUTE)].
* To cancel, press [F1 (CANCEL)].
• If the number of measures in the copy-source pattern and
the copy-destination pattern differ, the number of
measures in the copy-destination pattern may increase or
decrease according to this difference.
• When "ALL" is specified in copy-source part, then only
"ALL" may be specified in copy-destination part.
Additionally, if other than "ALL" is specified in copy-
source part, then "ALL" cannot be specified in copy-
destination part.
• When copying between drum kit parts and percussion
parts or backing parts, copy takes place in accord with
the predetermined correspondence between note
numbers and pads. Only note numbers assigned to pads
will be copied.
For more on note numbers and trigger inputs, refer to
Note Number (Factory Settings) (p. 96).
Measure
Measures to be cop-
ied (First Measure–
Last Measure)
First measure of the
copy-destination