Formatting A Usb Flash Drive; Other Functions; Adjusting The Display Contrast; Restoring The Factory Settings - Roland OCTAPAD SPD-20 PRO Owner's Manual

Other Functions

DelKit
1. Access the USB MEMORY screen (p. 28).
2. Select "DelKit" and then press the [ENTER] button.
3. Use the [–][+] buttons to select the data that you
want to delete, and then press the [ENTER] button.
%[ENTER]
4. Press the [ENTER] button to delete the data.
If you decide to cancel, press the [EXIT] button.

Formatting a USB Flash Drive

NOTE
When you format a USB flash drive, all data on the USB flash drive
is erased.
1. Access the USB MEMORY screen (p. 28).
2. Select "Format," and then press the [ENTER] button.
A confirmation screen appears.
3. Press the [ENTER] button once again.
4. Press the [ENTER] button to format the USB flash
drive.
If you decide to cancel, press the [EXIT] button.
30
Other Functions

Adjusting the Display Contrast

1. Press the [SYSTEM] button.
2. Use the [K][J] buttons to select "OPTION," and then
press the [ENTER] button.
3. Use the [K][J] buttons to select "LcdContrast."
4. Use the [–][+] buttons to select the value.

Restoring the Factory Settings

1. Press the [SYSTEM] button.
2. Use the [K][J] buttons to select "FACTORY RESET,"
and then press the [ENTER] button.
3. Press the [ENTER] button to execute FACTORY
RESET.
If you decide to cancel, press the [EXIT] button.
NOTE
When you execute this operation, all data and settings in the
OCTAPAD is lost. In advance, you should back up any important data
or settings to a USB flash drive (p. 28).