Deleting Data From A Memory Card [F3 (Delete)]; Formatting A Memory Card [F4 (Format)] - Roland V-Drums TD-20 Owner's Manual

Chapter 9. Using a CompactFlash Memory Card [CARD]
Deleting Data from a
Memory Card [F3 (DELETE)]
You can delete the unneeded data from a memory card.
1. Insert the CompactFlash card into the
CompactFlash card slot on the TD-20's front
panel.
2. PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the
"CARD MENU" screen appears.
3. Press [F3 (DELETE)].
The "CARD DELETE" screen appears.
fig.09-CardDel1_70
4. Use [+/-] or [VALUE] to select the backup area
containing the unneeded data.
5. Press [F5 (DELETE)].
The confirmation screen appears.
fig.09-CardDel2_70
* To cancel, press [F1 (CANCEL)].
6. Press [F5 (EXECUTE)] to delete the backup.
72
Formatting a Memory Card
[F4 (FORMAT)]
When a card is being used for the first time by the TD-20, you
must execute the following procedure to initialize the card.
(This prepares the card for use with the TD-20.)
When a card is initialized, all data on that card will be
lost. Make sure that it does not contain data you wish to
keep.
1. Insert a CompactFlash card into the
CompactFlash card slot on the TD-20's front
panel.
2. PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the
"CARD MENU" screen appears.
3. Press [F4 (FORMAT)].
The "CARD FORMAT" screen appears.
fig.09-Format1_70
4. Press [F5 (EXECUTE)].
The confirmation screen appears.
fig.09-Format2_70
* To cancel, press [F1 (CANCEL)].
5. Press [F5 (EXECUTE)] again to start formatting.