Part Settings [F2 (Part)]; Muting A Specific Part [F1 (Mute)]; Make Settings For The Backing Part [F2 (Backing)] - Roland V-Drums TD-20 Owner's Manual

Chapter 6. Sequencer (Playback)

Part Settings [F2 (PART)]

PATTERN PART screen (Only for User Pattern)
fig.06-Part_70

Muting a Specific Part [F1 (MUTE)]

You can mute specific parts in user patterns.
1. Press [PATTERN] - [F2 (PART)].
The "PATTERN PART" screen appears.
2. Press [F1 (MUTE)].
The "PART MUTE" screen appears.
fig.06-Mute1_70
3. Press [F1]–[F5] to turn each part muted or
played.
[F1]: Melody Part
[F2]: Bass Part
[F3]: Backing 1 Part + Backing 2 Part
[F4]: Percussion Part
[F5]: Drum Kit Part
4. Press [PATTERN] to return to the "PATTERN"
screen.
* You can check the part mute status in the "PATTERN" screen.
fig.06-Mute2_70
54
MUTE PLAY
Make Settings for the Backing Part
[F2 (BACKING)]
Here you can select the instrument used for the backing parts
(other parts than drum kit part and percussion part), etc.
1. Press [PATTERN] - [F2 (PART)].
The "PATTERN PART" screen appears.
2. Press [F2 (BACKING)].
The "MELODY (BASS, BACKING1, BACKING2)PART"
screen appears.
fig.06-Backing_70
3. Press [F1]–[F4] to select the part you wish to
set.
[F1]: Melody Part
[F2]: Bass Part
[F3]: Backing 1 Part
[F4]: Backing 2 Part
4. Press [CURSOR (up/down)] to select the
parameter.
5. Use [+/-] or [VALUE] to make settings.
Parameter Value
Inst Refer to Backing
Instrument List
(p. 98)
Key Shift -24–0– +24
Bend Range 0– +24
Description
Part Instrument
Shifts the overall
pitch (in semi-
tone steps).
Amount of
change in pitch
with pitch bend
at the maximum
level (in semitone
steps).