Key Test - Toshiba BA400 Series Key Operation Specification

8.12.2

KEY TEST

The test is performed in the following order.
(Start)  FEED key test  RESTART key test  PAUSE key test  (End)
The display language is English regardless of the LCD Language parameter setting.
FEED KEY TEST
RESTART KEY TEST
PAUSE KEY TEST
END DISPLAY
Notes:
1. If a key other than designated is pressed, the printer waits until the designated key is pressed. (The test
does not proceed to the next.)
2. If the key test does not proceed to the next test even after the designated key is pressed, the key may
be broken. In this case, turn off the printer.
LCD
Press the [FEED] key.
Press the [RESTART] key.
Press the [PAUSE] key.
Press the [PAUSE] key to return to the
upper-level menu.
134
Operation and LCD/LED status