Toshiba BA400 Series Key Operation Specification page 134

5. Tag check setting
protection password
setting screen
4. Example of operation when the tag check setting protection password has been set (when "ON" is set on
the tag check setting protection password setting screen)
1. SYSTEM MODE  <7>RFID  OTHER  TAG CHECK
2. Tag check setting
protection password
entry screen
* When the password matched: The TAG CHECK screen is displayed.
* When the password unmatched: Error message is displayed. Press the [PAUSE] key to exit this
menu and return to the upper-level screen.
3. TAG CHECK
screen
When "OFF" or "ON(ID)" is selected, the tag check setting protection password will be automatically set to
"OFF". (After this, the tag check setting protection password entry screen will not appear when opening the
TAG CHECK menu.)
MULTI WORD WRITE
OFF
ON
Notes:
1. Use of this function enables a speed-up of the data write operation.
When set to ON, data writing to the RFID tag is enabled in units of 2 words, which shortens the data
writing time.
(When "ON" is selected)
↓ [PAUSE] key
↓ [PAUSE] key
This menu is ended, and the
upper-level screen is displayed.
Display
↓ [PAUSE] key
Enter a 4-digit protection password.
Operation
Enter the 4-digit protection password.
129