Toshiba BA400 Series Key Operation Specification page 132

8.10.4.7 ENCODE POSITION
By performing an RFID calibration, an optimum data read/write position (distance from the home position) is
automatically obtained and set.
Max.
Min. value
value
+999.9 -999.9
Notes:
1. This parameter is effective only when the CALIB. MODE parameter is set to ON.
2. The printer will automatically feed RFID media forward/backward for the distance specified by CALIB.
POSITION parameter before writing/reading RFID tag, which is normally performed with @003 command.
3. The feed direction is indicated by "+" (backward) and "" (forward).
4. Setting values ranging from -2.9mm to +2.9mm do not reflect the read/write position fine adjustment.
5. For details of the RFID calibration, refer to Section 6.7 RFID Analyze Mode.
Step Display
0.1 Decimal
Integer Decimal
Sign
digit
None 3
127
0-padding
place measure
1 None
Unit of
mm