PRINT TYPE
4-1
▲
THERMAL TRANSFER
DIRECT THERMAL
DISPLAY
▼
PAPER CUTTING?
4-2
▲
NO
YES
▼
(Printing...)
CHECKING & PRINT
PRINTING
4-3
When the printing is completed. (Normal end)
PRINT TYPE
▲
THERMAL TRANSFER
DIRECT THERMAL
DISPLAY
▼
4-4
When an error occurred during printing
CHECKING & PRINT
RIBBON ERROR
PRINT TYPE
▲
THERMAL TRANSFER
DIRECT THERMAL
DISPLAY
▼
5.
In the case DISPLAY is selected:
PRINT TYPE
5-1
▲
THERMAL TRANSFER
DIRECT THERMAL
DISPLAY
▼
DISPLAY
5-2
▲
COUNTER
ADJUSTMENT(PC)
STORAGE AREA
USB SERIAL NUMBER
▼
COUNTER
5-3
▲
TOTAL FEED
FEED
FEED1
FEED2
▼
C1.6
C1.6
C1.6
C1.6
C1.6
4.8km
0.0km
4.8km
0.0km
1. Select either THERMAL TRANSFER or DIRECT
THERMAL.
2. Press the [PAUSE] key.
3. PAPER CUTTING? Menu is displayed.
1. Select YES or NO.
2. Press the [PAUSE] key.
3. The maintenance counter data and parameter settings
are printed.
4. "PRINTING" is displayed.
Note: A print sample is provided in Section 9.4.1.1
Maintenance Counter/Parameter Settings Print Contents.
1. When the printing is completed, PRINT TYPE menu is
displayed again.
The printer displays the error message, and stops.
The ERROR LED turns on and the ONLINE LED turns off.
1. Press the [PAUSE] key.
2. PRINT TYPE menu is displayed.
The printer recovers from the error, the ERROR LED turns
off and the ONLINE LED turns on.
Note
that the printer does
automatically.
1. Select DISPLAY.
2. Press the [PAUSE] key.
3. DISPLAY menu is displayed.
1. Select an item to be displayed.
2. Press the [PAUSE] key.
3. The data of the selected item is displayed.
For details of the Maintenance counter data, refer to
Section 8.4.1.2 Maintenance Counter/Parameter Settings
Print Contents.
43
not
reprint the label