Toshiba BA400 Series Key Operation Specification page 66

TAG CHECK [1] [2] [3]
[Description 1] Error tag detection
[Values to be printed 1]
OFF:
EPCCODE:
PASSWORD: Error tag detection is performed. Access password area is read before data write to
[Description 2] Password setting to protect error tag detection
Note: Only when "ON (ACCESS PASSWORD)" is selected for TAG CHECK
[Values to be printed 2]
OFF: Disabled.
ON: Enabled.
[Description 3] Auto unlock function
Note: Only when "ON (ACCESS PASSWORD)" is selected for TAG CHECK
[Values to be printed 3]
OFF: Disabled.
ON: Enabled.
MULTI WRITE [ ]
[Description] Hibiki tag multi-word write
[Values to be printed]
OFF: Disabled.
ON: Enabled.
CALIB. MODE [ ]
[Description] RFID calibration function
[Values to be printed]
OFF: Disabled.
ON: Enabled.
ENCODE. POSITION [ ]
[Description] Distance to the optimum read/write position obtained through RFID calibration
[Values to be printed]
-999.9mm to +999.9mm
SUCCEEDED TAGS
[Description] The number of times data write succeeded
[Values to be printed]
0 to 9999999
VOID PRINT TAGS
[Description] The number of times data write failed
[Values to be printed]
0 to 9999999
<< RTC >>
BATTERY CHECK [ ]
[Description] Battery check
[Values to be printed]
OFF: Disabled.
ON: Enabled.
RENEWAL [ ]
Error tag detection is not performed.
Error tag detection is performed. ID area data is read before data write to check for error.
check for error.
Note: This value is valid only for GEN2 tags.
61