Tone Adj. <T - Toshiba BA400 Series Key Operation Specification

8.5.28.1. TRANS. (RIBBON)
NORM: Normal
HIGH : High
LOW: Low
SA1: SA Type1
SA2: SA Type2
Rev3: Reserve3
Rev4: Reserve4
Rev5: Reserve5
Rev6: Reserve6
Rev7: Reserve7
(Supplement) When SA Type2 is selected, the operation is the same as High.
8.5.28.2. DIRECT
NORM: Normal
HIGH: High
LOW: Low
SA1: SA Type1
SA2: SA Type2
Rev3: Reserve3
Rev4: Reserve4
Rev5: Reserve5
Rev6: Reserve6
Rev7: Reserve7
(Supplement) When SA Type2 is selected, the operation is the same as High.
8.5.29 TONE ADJ. <T>
Max.
Min. value
value
+10 -10
Remarks:
1. Setting a value in the positive (+) direction, the print tone becomes darker. And, setting a value in the
negative (-) direction, the print tone becomes lighter.
+10 ← (Darker) ← 0 → (Lighter) → -10
2. The print tone fine adjustment value (thermal transfer) is the sum of the fine adjustment values set in the
system mode (by key operation) and set by command (from the PC). The max. value is -10 ~ +10. If the
value exceeds the print head rating, it is automatically corrected.
3. The factory default is +0step.
Step Display
1 Decimal
Integer Decimal
Sign
digit
Exist 2
89
Unit of
0-padding
place measure
0 None Step