Table of Contents
Advertisement
2. Troubleshooting When
Using the Copy Function
This section explains likely causes of and possible solutions for copier function
problems.
When a Message Appears
This section explains the machine's main messages. If other messages appear,
follow the instructions they contain.
Important
❒ For messages that are not listed here, see "When You Have Problems Operat-
ing the Machine".
Message
Cannot detect
original size.
Cannot detect
original size.
Cannot detect
original size.
Check original
orientation.
Check paper
size.
Rotate Sort is
not available
with this paper
size.
Cannot punch
this paper size.
Cause
Improper original is placed.
Improper original is placed.
Original is not placed.
Original is not placed in a proper
orientation.
Improper paper size is set.
A size of paper for which Rotate
Sort is not available is selected.
The Punch function cannot be
used with paper size selected.
Solution
Select paper manually, not in
Auto Paper Select mode, and do
not use Auto Reduce/Enlarge
function. See "Sizes difficult to
detect", Copy/Document Server
Reference.
Place the original on the exposure
glass. See "Placing Originals on
the Exposure Glass" and "Sizes
difficult to detect", Copy/Docu-
ment Server Reference.
Place your originals.
Change the orientation of the
original.
If you press the {Start} key, copy
will start onto the selected paper.
Select the proper paper size. See
"Sort", Copy/Document Server
Reference.
The following paper sizes are
available for Punch mode: A3L,
B4L, A4KL, B5KL, A5K,
1
11"×17"L, Legal(8
/
"×14")L,
2
1
Letter(8
/
"×11")KL,
2
1
1
Half Letter (5
/
"×8
/
"),
2
2
1
1
Excecutive (7
/
"×10
/
4
2
F/GL (8"×13")K,
Foolscap (8"×13")L,
1
/
"×13")L ,8KL,
Folio (8
4
16KKL. Select one of these sizes.
")KL,
17
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
