Loading Paper Into The Large Capacity Tray - Ricoh Aficio C2500 Operating Instructions Manual

Reference
p.83 "Changing the Paper Size"
p.86 "Changing to a Size That is Not Automatically Detected"

Loading Paper into the Large Capacity Tray

The following procedure explains loading paper into the LCT.
Important
❒ LCT (optional) uses 8
paper. If you want to load A4K, contact your service representative.
❒ Align the paper stacks and load them against the left and right walls, or a pa-
per misfeed might occur.
❒ Do not stack paper over the limit mark.
A
Pull out the LCT, slowly until it stops.
B
With the print side up, align all four sides of two paper stacks, and then
load them next to each other in the tray. Each side has a limit of 1,000 sheets.
C
Push the paper tray slowly in until it stops.
1
/ "×11"K paper exclusively. Only load 8
2
AMJ003S
AMJ004S
Loading Paper
1
/ "×11"K
2
6
81