Table of Contents
Advertisement
Field Service Ver. 1.1 Jun. 2010
16.2.28
Printer 4-color: low image density
A. Typical faulty images
B. Troubleshooting procedure
Step
Section
1
Paper
2
Transfer belt unit Terminal is dirty.
3
Transfer roller
unit
4
5
IDC sensor
6
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
Check item
Paper is damp.
Transfer roller is installed properly.
Charge neutralizing needle is not
separated and ground terminal is
connected properly.
Sensor is dirty.
The problem has been eliminated
through the checks of steps up to 5.
16. IMAGE QUALITY PROBLEM
Result
Action
YES Change paper to one just
unwrapped from its package.
YES Clean.
NO
Reinstall.
NO
Correct or change.
YES Clean IDC sensor and execute
the image stabilization.
NO
Change image transfer belt unit.
Change IDC sensor.
Change printer control board.
Change high voltage unit.
A02EF4C516DA
251
Advertisement
Table of Contents
