Bogen NQ-S1810CT-G2 Configuration Manual page 8

Note: Some buttons only appear on this page when applicable.
To use the Firmware Update page:
1 On the appliance web UI's main page, select
firmware version.
• If the device is in Standalone mode, the
Selecting it checks the Bogen website for the latest firmware version available. If a
version newer than the one currently installed is found, it is downloaded to the
appliance and the
• If you already have a firmware file you would like to install to the appliance, select
Upload Firmware
ance. A popup screen appears that allows you to select the file that you want to
upload. You can navigate to the file's location. After you select the file, select
Upload.
The page displays the uploaded firmware version ("New Nyquist Version") and an
Update Firmware
appliance's firmware to the uploaded version.
• If you want to return your appliance to its original factory configuration, select
Restore Factory Settings.
• Select Reboot Appliance to restart your appliance.
Figure 3. Firmware Update Page
Update Firmware button will be shown.
to upload the firmware file from your computer to the appli-
button appears. Select this button if you want to update the
Firmware Update to view or update the
Check for Updates button will be shown.
6