Intercom Tuning - Bogen NQ-S1810CT-G2 Configuration Manual

1 Click the knob control, hold the mouse button down, and drag the mouse up or down
to increase or decrease the value.
2 Double-click the knob, type a value into the resulting popup, and click the Save but-
ton.

Intercom Tuning

The VoIP Speaker provides half-duplex communications, which means that only one party
can transmit at a time. Which party can transmit (i.e., this VoIP Speaker or the Admin
Phone) is controlled automatically by the Intercom Tuning settings. Whenever a signal
from the Admin Phone exceeds a certain level—known as the switching sensitivity level—
the VoIP Speaker switches to receive mode, allowing the party using the Admin Phone to
speak. When the signal is below that level, it switches back to send mode, allowing the
party using the VoIP Speaker to speak.
Selecting Intercom Tuning from the Menu icon on the DSP page displays the Intercom
Tuning page. The intercom is designed to turn off the speaker while the intercom user is
talking and turn off the microphone while the remote user is talking. This DSP feature
defines at what input and output levels the intercom will switch between the microphone
and the speaker.
21