Configuration Settings Tab Parameters - Bogen NQ-S1810CT-G2 Configuration Manual

Configuration Settings Tab Parameters

The easiest way to configure Nyquist appliances is to obtain configuration settings from
the Nyquist server by selecting
ually configure an appliance through the appliance's Web UI when Standalone Operation
is enabled (see "Configuration Settings (Standalone disabled)" on page 11).
To view the Nyquist appliance configuration:
1 On the appliance Web UI's main page, select
2 View the settings as described in Table 5 on page 11 for normal configuration, or
modify the settings as described in "Configuration Settings (Standalone disabled)" on
page 11 for Standalone Operation configuration.
3 If changes were made (Standalone Operation only), click the
Settings and/or
Figure 5. Appliance Configuration Settings (Standalone disabled)
Get Configuration From
Save Multicast Addresses
Server. However, you can man-
Configuration Settings.
Save Configuration
buttons to save your changes.
10