Using The Dashboard - Bogen NQ-S1810CT-G2 Configuration Manual

Using the Dashboard

Note: On the Dashboard, the
The dashboard displays the following fields:
Device Type
Serial Number
MAC Address
Firmware Version
Relay Trigger Status
Figure 2. Nyquist Speaker Dashboard
Device Type Nyquist S1810V2 refers to the Nyquist S1810-G2.
Table 1. Appliance Dashboard Fields
Identifies the model of this device.
Identifies the serial number for the device.
Identifies the Media Access Control (MAC) address,
which is a unique identifier assigned to network inter-
faces for communications on the physical network seg-
ment.
Identifies the firmware version installed on the device.
When enabled in Configuration Settings, this field
indicates the status of the NO/NC output relay, which is
activated whenever an audio signal is being sent to the
VoIP speaker.
3