Setting Dsp Parameters - Bogen NQ-S1810CT-G2 Configuration Manual

Setting DSP Parameters

When you select DSP from the appliance's web UI, the DSP page appears.
From this page, you can set parameters for DSP, which is a form of processing that uses
digital data to simulate characteristics found in analog circuits. With DSP, you can alter
analog signals, such as audio signals, that have been converted to a digital format.
You can also select Save Settings to Server to back up all configuration settings to the
Nyquist server.
The DSP page allows you to adjust the signal level for the Output channel, as well as view-
ing level indicators for both the input and output signals. Selecting the DSP Features
button (hamburger menu above the OUT signal indicator) displays a menu that allows
you to access DSP features, as described in the following table.
Tip:
You can select Save Settings to Server to back up all configuration settings to the
Nyquist server.
Figure 7. DSP Page
19